1. I set them in a prescription pill bottle filled with injector cleaner. I put tape around the top so the screens were just below the fluid.
2. Took a 12 volt motorcycle battery, clipped alligator clips to the injector, and briefly cycled each injector 5 or 6 times
3. Blew them off.
The screens were now clean so I assumed the rest was.
Put the injectors back in the sled, dumped in fresh fuel, primed the pump, then crossed my fingers!
It started after about 10 pulls, then quit. I pulled it another 4 times, then it started and kept running! YES!. I shut it off after a minute, waited about 5 minutes, then tried again. It started on the first pull, and I did the same thing 6 times in a row, starting first pull each time!
So, now, besides waiting for snow, I need to double check all my connections, put the hood back on, double-check all the fluid levels, and give it a test run when I can!
